Orpaz T40 Light Bearing Holster, Adjustable and Modular Holster with Flashlight Fits Most Pistols and Most Lights, Lasers, Sights and Optics

what our customer say this product:

Powered by

1. GJS77 Verified Buyer – 20 December 2024

   I’m afraid this holster has ONE fatal design flaw. The top opening of the holster is perfect for the pistol itself, but it is a touch too tight for the slide-mounted red dot optic atop my pistol, which this holster is specifically designed for. When I re-insert my weapon, my Holosun 507C is slightly wider than the width of the slide, and it rmust be forced into the holster, rubbing against the sides very hard. This presses the control buttons on the red dot and also will damage them over time, not to mention messing with your red dot settings or perhaps turning off your red dot when your pistol is in the holster (or being re-inserted). I am not risking damage to my $320 red dot, nor risking having my red dot be turned off (or brightness level changed) in a life-or-death scenario where my red dot must be on when I draw my weapon. This makes this product totally un-usable. Such a shame, because it’s such a great product otherwise.
   

2. Dr. Awesome Verified Buyer – 25 February 2025

   I have 4 of these now for various Glocks with various lasers and lights attached. They were the only holsters I could find that would fit different brands and combinations. They have a GREAT Customer Service dept, as one had arrived with a small crack in a non critical area, and they shipped me a new one a day later. Told me to keep the old one, which I just ran a bit of superglue down and is perfectly functional as a backup. I have quite a few Orpaz holsters now. I would say the ONLY thing I don’t like about them is the mounting system is not compatible with other brands like Safariland or Blackhawk. Orpaz devices mount on a hirth joint (look it up), which is adjustable and versatile, but doesn’t work with other systems on the market. I ended up drilling some small holes and using heat set threaded inserts to be able to make mine to attach to a Safariland QLS plate so that they would be easily movable to my Safariland set ups on my belts. I was going to 3D print an adapter, and someone else may already have done that by now, but my approach seems to work fine for my setup. Love the holsters in every other aspect though.
   

3. Manuel T. Verified Buyer – 3 March 2025

   Lowest setting for the magnet thing or the light holder don’t allow pistol to fit

   

4. Kindle Customer Verified Buyer – 8 March 2025

   I love this holster! I have one on my tactical belt, which is similar to what I wore while in patrol (retired law enforcement). My wife’s Holster is also an Orpaz with their quick detach system. The quick detach system allows us to easily share our pistols, for problem solving and testing. I got my my daughter and three nephews Orpaz Holsters for their gun belts and they love them. When we all go shooting together, it is so easy to swap guns using their quick detach system, it is awesome. The thumb release is very natural when drawing the gun out. We all adjusted to it in one practice session. This Holster is fast! In patrol that can save your life, but now that I have it I don’t necessarily need it. I wish I could have had this Holster in patrol. It has a passive retention and an active retention system, making this a Level II holster. The passive retention consists of a magnet at the bottom of the Holster, which holds the gun in place. The magnet is strong and locks the gun in, while making it about impossible to get the gun out. They give you round pads that you place over the magnet to set the level of strength that is needed to draw the gun. The active retention is a thumb pressure switch that releases a cam arm holding the gun in place, it just swings it to the side. Very efficient and easy. The light bearing Holster is customizable for your preferences. Just get this you won’t regret it.
   

5. Sir. Patschington Verified Buyer – 19 March 2025

   The holster and quick attachments for the holster to belt or vest are amazing
   Sadly extended mag release coupled with a threaded barrel so I can have the lower stop installed cause my mag to release but once I got the longer bolt to use for lower stop it rides great and securely
   

6. Garret Hinze Verified Buyer – 23 March 2025

   I like it a lot, but it doesn’t work with lights like the streamlight TLR1, and I’m not a huge fan of the”pull backwards and press downwards” function of the thumb release. If rather just have to only push down OR only pull back on the thumb release. Otherwise it’s a cool holster that will fit with just about any firearm and light combo.
   

7. Yoav Liberman Verified Buyer – 20 April 2025

   The Orpaz T40 Light Bearing Holster is a top-tier piece of service gear that combines innovative design with impressive functionality. It was designed and manufactured in Israel, a country known for its defense and security industries and cutting-edge plastic manufacturing. **Key Features** This holster’s most notable attribute is its versatility. It accommodates a wide range of handguns and accessories, including various barrel lengths, lights, lasers, sights, and optics. The holster’s magnetic barrel terminus is adjustable, allowing you to tailor it to different gun models effortlessly. Additionally, the holster’s width is modifiable to fit an array of gun lights, making it adaptable for multiple configurations. The modularity extends to carrying and mounting options, providing users with significant flexibility. The model I tested’s clever red-dot shroud mechanism, which protects the sight until you press a release button, is a highlight. The shroud pivots smoothly, enabling a quick and unobstructed draw. **Drawbacks** While this holster is exceptional, there are two points worth noting: Price: This is not a budget-friendly option. Gun owners who prefer a dedicated holster for each firearm can find cheaper alternatives tailored to specific models. However, the investment is worthwhile for those who value adaptability and the ability to switch between firearms without purchasing multiple holsters. Instructions: The product ships with three separate instruction sheets—two cards and a leaflet. While the effort to cover the holster’s extensive configuration options is appreciated, the materials are somewhat disorganized and challenging to follow. The text appears to have been written by a technician with limited fluency in U.S. firearms terminology. A single, well-structured guide and a polished translation by a professional copy editor familiar with the market would vastly improve the user experience. **Final Thoughts** The Orpaz T40 is a robust, innovative, and highly adaptable holster that suits a broad range of firearms and carrying preferences. It’s ideal for those who need a versatile solution for multiple setups. Despite the high price and minor frustrations with the instructions, the holster’s performance and functionality are difficult to beat.