Customer Reviews With Photos

Well made and simple to install. This is an easier way for target acquisition and accuracy. Elevation and windage is positive and tactile makes it easy to zero. It’s affordable and conserving buying another soon.

I'm very impressed with this micro red dot and plan to install it on my handgun once I have the firearm ready. This diverse red dot can be mounted on handguns or rifles making it a customizable sight for many uses. The sleek design is durable and comparable to other red dots on the market that cost in excess of 3x the amount of this one at just $125 at the time of review. As I get older, I've been leaning more and more toward red dots because they offer me a much faster acquisition time compared to standard iron sites. The shake to wake technology built into this is perfect and with an extra battery should allow me to use this worry free for at least 2 or 3 years. Highly recommend this site to enhance your precision and to improve the overall appearance of firearms!

First off I would not call this a safe whatsoever. It has very thin metal and the locking pins do not secure how a safe would instead they just pop out just to hit the frame of the cabinet to prevent opening. I would not recommend this if you are serious about protecting your items. I'm using it as a temporary solution until I can afford a long term solution. The finish of the product itself is very cheap feeling and as pictured the paint/powder coating is poor and chipping away this was on arrival... Overall it is a cheap solution and you can't expect much just be sure you know it doesn't provide much security and inspect on arrival if you are concerned about the finish

It is the same mold as the HF Apache 9800 case. Went with this because I already had one 9800 case but didn't want to pay retail. This is slightly cheaper. I'm using it to store gear on my roof rack. Recommended.

I have gone through a lot of LPVO's. Started with SFP (Second Focal Plane) scopes, then moved to FFP types because "better". The problem for me has always been that the 1x performance was important, and FFP scopes fall apart at the reticle at 1x. I selected the CM7 reticle, and it is very usable as a red dot at 1x. At max brightness it smears for my eyes, but at level 5 it is bright, crisp, and visible in anything but glaring brightness. The eye-box is reasonably big/easy to acquire, and not unreasonable to use as a primary at 1x. That is a promise seldom kept by FFP LPVO's in the real world. Zooming, the Christmas tree swells and is usable. Glass clarity is actually very good, and I like the "OFF" setting between each illumination level. I like this a lot, and have paid a lot more for a lot less just a few years ago.

I got this to organize some of my Airsoft collection, and it actually works great! It’s narrow enough to hold my smaller 9mm type AR which is perfect. The only con, which is very small, is the anchors it comes with have almost a full 1” of smooth bore until the part that “grasps” the drywall, and drywall is not that thick, so I had to use my own anchors. Aside from that it is very nice though and plenty sturdy! It was a fairly easy install process and only took about 10 mins once I realized I just needed different anchors. So super quick. I would but it again for sure!

This is the perfect sized pack. It can carry a hydration bladder and has the tube access hole that has a flap cover and elastic strap to secure the hose as it’s attached to either shoulder strap and a pocket to securely store the mouth piece into. The mail compartment also alga’s a hardboard Velcro covering to attach accessories and to also place a blast if plate into. The second pocket is a smaller but will hold a pistol easily for quick access. Key clip on a lanyard. Super comfortable backing that on the reverse side with shoulder straps to match. All Adjustable straps and waist strap. Water resistant and perfect size for a daily outing. Next I will be getting a ballistic plate for it. High quality pack that is extremely versatile and has many features one needs for an EDC pack. Recommend

Everything was not in its place, so this was a return that either wasn't checked or checked and nothing was put in its place! Not happy! Wheeler needs to do a better job! I have scope levels from way back, thought I'd stick with Wheeler and bought this kit that lacks the S2 for scope mounts and bought their digital torque screwdriver that seems to be missing. I'll update thus post when needed.

Works great for the kids to play with outside at night. Got this for night games playing airsoft after getting wrecked and one game with this we were already doing much better lol. Comes with a nice little storage case to keep it in too.

Holster is missing both connecting screws. I ordered the carbon fiber and was sent the black holster. 100% unusable and clearly a waste of money.

The light has 3 modes. Flashlight only, red dot only and dual. There are buttons on either side of the unit for ambidextrous access to turn it on and off. It remembers the last mode you set with every time you turn it back on. In order to change the mode, you just simultaneously press the buttons on both sides. The battery is one that I was not familiar with. It is a 3V CR-1/3N. It takes 2 of these. They provided 4, which is great! You just stack them when installing. To install them, you just need a small coin, like a dime. It is super easy to install the batteries. More typical batteries for optics like this would be the CR-123 or the CR-2, which I included a picture of so you can see the size difference. Everything is a pro and con. With the batteries, the con is is that it uses somewhat less common batteries (but you get a spare set and you can get them on ngclab.com very easily and inexpensively), but the pro is the size of battery that it uses is small, which results in a smaller profile, which is good for concealment. I would say that the red dot performs as expected and the light is adequate. It's not going to blow you away, but it is certainly adequate, especially for close encounters. The holster is also very nice and what I would call...fairly common/standard in design, except that it is ready to receive your "piece" with this unit attached. It clicks in place for a nice hold in the holster, but releases easily. Installing was super easy as well. I'm very happy with both the light and holster.

Very impressed, the build quality is very good and didn't take much time to put together as it was only 6 pieces. Whole thing weighs over 60 pounds so had a little trouble getting it upstairs but add in the fact that you can screw the safe into the backside of the wallet very confident it would give someone a hard time to steal. Also did a burn test to see if it would catch fire on one of the pieces before assembling and can say for a fact that i feel confident leave important documents inside. Storage wise was able to store more than what i was expecting super spacious.

I am not a hunter. What I am is an aspiring wildlife videographer. I wanted to discover what creatures were visiting my suburban backyard. I was thrilled with the results taken with this easy to operate camera! The first sample video was shot with the camera set-up in my backyard a couple of dozen feet from my kitchen window. No photo editing involved. All the video/screenshot images were set to 1080p. I will have lots of year-round fun with this device. So much so that I am setting up a second camera to cover my front yard. I was also impressed with the quality construction at an affordable price. Highly recommend!

Let’s look at this Sunwayfoto TT-01 Tactical Table. I needed a stable platform that could handle multiple devices during fieldwork, from cameras and spotting scopes to rangefinders. The TT-01 seemed to be a good option with its robust CNC-machined aluminum body, integrated Arca rails, and an abundance of threaded mounting sockets. Straight out of the box, I liked its craftsmanship. The aluminum build felt solid and durable, and its hard-coat anodizing gave it a premium finish. However, once I started using it, I noticed that the anodized coating wasn’t as durable as I’d hoped. After a few sessions in rugged environments, scratches began to appear, and the coating wore off in some places. So, it’s definitely not “mil-spec”. While this doesn’t impact performance, it does detract from the otherwise polished aesthetic. In use, the TT-01 shines in its flexibility. Some pros for this table are the M-Lok slots are in great spots and all mounting M-Lok super easily. The QD points machined in the tac table are great and fully functional. All the threaded areas are machined to a great quality. With 21 3/8"-16 and 20 1/4"-20 mounting sockets, I had no trouble securely attaching a variety of devices. The Arca clamps at both ends allowed seamless integration with my range finder, spotting scope, and other equipment. It comes with two Arca QR plates so you should have no trouble adding equipment that does not have integrated Arca mounts. I have mounted it on a standard tripod’s ball head with a 3/8-16 mounting socket, but you can also mount it directly on Arca tripod ballhead directly via its OR plate. Setting up my spotting scope alongside a rifle was straightforward, and the table provided a very stable platform for precision shooting during a recent competition. It gives you a great platform to use a shooting bag to shoot from a tripod if that's your deal. Or even mount multiple cameras - this tac table is great for that too. The size and layout make it easy to organize gear, keeping everything within reach and reducing downtime during adjustments. Overall, I would absolutely recommend this tac table. The main downside I noticed was the weight. It’s more than ½ kilo! 618 grams to be precise. For a tactical table, it leans towards the heavier side, especially when fully loaded. While the weight adds to its rigidity and stability, a bit of trimming - perhaps in the less utilized M-Lok and QD / Arca / set screws on the sides - could cut down the weight some and make it more travel-friendly without compromising functionality. Just a thought. But overall, the Sunwayfoto TT-01 is a solid piece of gear for professionals who need a reliable, multi-purpose mounting platform. Despite the minor flaws in the anodizing and weight, its versatility and performance make it a worthwhile investment. Bottom line: The Sunwayfoto TT-01 Tactical Table is a versatile and robust mounting platform crafted from CNC-machined aluminum with features like integrated Arca rails, M-Lok slots, and numerous threaded sockets. It excels in flexibility, allowing easy attachment of cameras, scopes, and other gear. Its stability shines during precision tasks like shooting or multi-device setups, and it comes with handy Arca QR plates. Downsides include its heavy weight (618g) and an anodized coating that scratches easily in rugged use. While not truly "mil-spec," it's highly functional and reliable, making it a great choice for professionals. Solid 5 stars, highly recommended! Pros: 1. CNC-machined aluminum body; solid and durable. 2. 21 3/8"-16 and 20 1/4"-20 threaded sockets for versatile mounting. 3. Integrated Arca rails with two Arca QR plates included. 4. Functional M-Lok slots and QD points for flexible setups. 5. Stable platform for shooting, cameras, or multi-device use. 6. Organized layout for quick adjustments. Cons: 1. Heavy at 618g - less travel-friendly. 2. Anodized coating scratches and wears easily.

it's nice tank... a little heavier than your typical carbon 68/4500 but for the 50$ less well worth it... only thing I didn't like was how it's minimal bubble wrap just thrown in the box... i will be buying another for a backup soon..