Customer Reviews With Photos

This gun safe truly exceeded expectations! With a depth of 13.78 inches, it easily fits my rifles and shotguns— even those equipped with optics. The 43.32-inch storage height is already generous, but the removable shelf design adds even more flexibility—once removed, it can accommodate longer firearms with ease! Weighing in at 110 lbs, the cabinet is solid and sturdy—the thick metal body is impossible to scratch with a knife, and the door stays perfectly stable when opened. The interior is lined with soft padding to prevent any damage to your firearms. One of the best features is the built-in power outlet—I connected a dehumidifier directly, so there’s no more worrying about moisture or rust! The unlocking system is top-notch: fingerprint recognition is incredibly accurate (zero false attempts), and is clearly visible even in the dark. It also comes with emergency keys and a Type-C emergency power port—no more worries about power outages or lost keys. The LED lighting, storage compartments, and door organizer are the cherry on top. Passports, cash, handguns, tools— Everything can be neatly stored! I had a small issue at first, but customer service responded within 24 hours, patiently walked me through the solution, and resolved everything the same day. Their support deserves a huge thumbs up!

Used this on a gen 4 Glock 19 sub compact with an RMR adapter. The sight fit the adapter well. Now just waiting for the locktite to set. I’ll update once I have it sighted in. It’s plenty bright and the shake to wake function works just fine. After 5 minutes of inactivity, sight turns off. You can turn sight off for storage by holding the minus button for three seconds.

I purchased this security container to store my carry handguns. The construction is sturdy, the fingerprint scanner is reliable, and it comfortably holds four pistols, two of which have red dots mounted to them. The strut opens the container door easily, quietly, and quickly. The foam cutouts are high quality. For the price, this container cannot be beaten. Note: This is by no means a SAFE. It will not stop a prying attack, but it is acceptable to keep firearms out of children's reach. Areas where the container can be improved: I would like to see more than four digits on the keypad to increase the number of possible numeric combinations. The programming button can be activated without removing the protective cover. This is a problem if an unauthorized person tries to access the container by exploiting the button and reprograming a fingerprint or combination with the container door closed. While it may be difficult, it is not impossible. Overall, I would recommend this container to store firearms if you have the ability to place the container in an inconspicuous location.

I ordered this "safe" as I wanted secure storage for a reasonable price, and have found it to be an excellent value. The safe arrived quickly and was well packaged with foam protection, cardboard inserts, etc, however it is heavy (probably 120lb) and I'm sure got manhandled around a bit during shipping. The finish on mine was in good shape, no scratches, etc. I did have one very minor dent / ding, which I'm sure was due to shipping, but it's hardly noticeable and I don't blame the manufacturer as the packaging was good. I think a large, heavy item such as this is probably just not treated too gently during shipping, and that's not the manufacturers fault. Overall, mine arrived in great shape and I'm very happy with the quality (welded with no visible seams, etc). The electronics on mine work perfectly and lock was very easy to program. The steel is pretty thick (I give it 4 stars). It's not as heavy a gauge as some more expensive "safes," but is substantially thicker than gun "cabinets" I've looked at. It's right what I was hoping for in this price range. My package also came with a small safe as well, which was a nice add on. Both safes were easy to bolt to the floor (or shelf for the small one) on the bottom, and a wall from the back. I did add some larger washers to make them more secure when bolting in. The safe will easily hold 5 long guns even with scopes on a couple. Not sure you could have scopes on all 5 though. Not sure if it will hold a shotgun with a 28" barrel (I haven't tried yet). It will also accommodate a couple of handguns in velcro holsters on the inner door and velcro sticks great to the inner door "carpet." I like the way the door is recessed when closed. It would be very difficult to pry, and even if the hinges were somehow cut, you would still not be able to open the door as the hinged side is recessed behind the outer edge of the safe when the door is closed. I did have one minor issue with the inner storage compartment door (key) lock on my large safe, which RPNB resolved very quickly and very much to my satisfaction. Honestly, I wasn't sure what to expect customer service wise, but RPNB responded within 24 hours to my inquiry and their customer service was outstanding! I would not hesitate to buy from them again. Customer Service is critical and they did a fantastic job! Overall, I wanted a secure option for a reasonable price, and this safe is perfect for my needs. It's not fireproof, or as heavy duty as a larger, more expensive safe, but it's thicker and much better quality than a typical gun "cabinet." It feels absolutely secure to keep children or curious persons safe from accessing firearms, and also feels like a reasonably solid deterrent from a criminal theft standpoint as well. I'm very pleased with this purchase and definitely recommend it! For the money, it's perfect for me, and I love it! Edit - after more than a year, this safe still works great, as does the smaller one it came with! I have found that it can indeed fit a shotgun with a 28" barrel with about 1" to spare for height, along with another shorter shotgun, 3 rifles (one with a scope and 1 with a red dot sight) and 4 handguns in velcro holsters attached to the inner door.

These stands are awesome. Very satisfying. Works with the metal stands that came with or get some 1x2 wood which fit perfectly. You know the stands get shot up. Lol

High-quality leather and exceptional craftsmanship! Very happy with this sling!

Almost 1 to 1 match with the real g3 shirt, the torso material is as soft as it can get, stitchings are pretty good as well. There is no distinguishable difference in the color and patterns of the camo compared to the real crye g3 pants. I am expecting it to hold up well during training and all the autism larping activities.

I recently acquired a shotgun that did not come with the original choke set and it is compatible with the BER/Ben Mobil series, so this set was of high interest. The SG in question is a CZ Redhead and these chokes fit extremely well and will probably replace the OEM as these have the external extension which makes them much easier to change and are visibly marked with size and constriction for easy change outs if needed. The case is a nice small plastic case and includes the needed tool for extracting originals and should be used to tighten these in the barrel as well instead of just hand tight. On an added note, these also fit a RIA side-by-side that I own and will probably see use in it as well. I’m very pleased even though I have not had a chance to pattern them, and doubt I will, I’ll give them a field test with clay pigeons soon. I don’t shoot steel shot, so there is no downside to me on that. Price is most appealing.

I was extremely please with the quality of this scope. The middle of the target was the initial site in at 100 yards and the top left was fine-tuning and the bottom two were my last two 10 shot groups. Max power takes a little getting used to but I was able to clearly see my shots with a 223 at 100 yards. I was extremely satisfied with the accuracy of the scope because this was a range day using 62 grain green tips. Although I'm totally satisfied I expect my next range visit with 77 grain boat tail hollow points will shrink those groups which are already pretty impressive in my opinion for my skill level.

I have many of their cases and they are the best in my opinion ruggedly made And they hold up great. This one is being used for a Benjamin air gun and works perfectly It's got three velcro pockets When I use for pellets The other one I have the magazines and manual And the largest pocket I have a bunch of targets in there so it keeps everything together and secure

Great value for the money. Fits and mounts nicely for what I put it on. Visibility is great and seems like it will preform well and be durable.

I’ve got to say.. I’m really impressed. The build quality is solid. It feels sturdy and well-made, which is exactly what I need for keeping my stuff secure. The setup is pretty slick too, with a key, a code, and a fingerprint scanner for easy access. Honestly, I was a bit surprised at how smooth the fingerprint scanner works. The little handle is a nice touch for when I need to move it around. It’s a small thing, but makes a difference. Definitely recommend it if you’re looking for something secure, reliable, and convenient!

Are you in the market for a metal target frame for your low-velocity weapons (air gun, bb gun, airsoft gun, slingshot, etc)? Would you like it to collect your rounds? How about giving you options for stationary paper or rotating metal targets? If so, Aimax Outdoor Pellet Gun Target Trap may be what you need! It's a DIY kit with four walls, two metal target hangars, a paper target holder, and paper targets. It's easily put together within a few minutes and weighs a little over 14 pounds. The target isn't that tall (12 inches), so you either need to put it on an elevated surface or shoot from far away to get a straight shot from shooter to target. Our boys set it up a berm at chest height to shoot at it. The targets are 3mm deep and are heavy compared to the ultra-thin target stand. With our high-powered pump pellet guns, we can severely dent or penetrate the back plate with any shots missing the targets at it's highest pump pressure. However, at anything lower, the pellet doesn't cause the target to rotate. Using slower air weapons is even worse where the bbs and airsoft pellets just bounce off the target and back towards the shooter. A pile of bbs/pellets can usually be found in a line in front of the target stand after shooting. For paper target shooting, this works extremely well, as long as you remove the metal targets and poles from behind. Then all the ammo will be collected in the target frame. I would NOT use anything higher powered than an air gun, and NOT recommend any .22lr ammo for this target stand for safety reasons. Overall, it's an easy build and does what it should: be a target for shooting. However, it seems that Aimax Outdoor tried to combine targets used with higher caliber weapons with a frame that supports low velocity air weapons, and it kind of works, kind of doesn't work. But it's a great paper target frame to collect your spent ammo! I recommend.

I’m really impressed with the camera so far! I purchased it for our house, where we have a large backyard, and the second one for hunting. The installation instructions were easy to follow, and the video resolution is excellent. Plus, the zoom, pan, and tilt features allow you to easily adjust the camera view. It’s also great that you can access it directly from your phone, and the app comes with a 30-day free trial. I recommend this camera for both home security and outdoor recreational use.

Ok so when i received it i flipped the latches and could not get the lid to open and i really pulled at it. Well guess what - it was vacuum sealed and i had to release the knob screw by the case handle until it went “hisssssssss” and equalized pressure. I typically only see that on pelican and mil issue cases- so yeh i was impressed. Came with a nice reusable desiccant can, cutouts are well placed and well executed- You will have to pluck out the foam, it is laser cut but they leave it in there for you to remove as needed. Was not difficult. Does not come with a photo guide so use photos on ngclab.com here as a guide. The far right foam is cut slightly different so you can have a replacable “assembly” for either a 5th full size pistol + row of mags, or, a nice big storage area for eyes/ears etc. What i discovered is, if you take out the far right pistol foam assembly and leave the cavity, you can pack three sub-compact pistols in holster or protective pouches, plus several mags. That is 7 guns in this case with mags, awesome. Or i can put back in the far right foam and carry 5 full size pistols plus mags. See my photos - from left to right in case: Kimber Warrior .45, Sig P229 .40, Springfield XD .45, Walther PPQ 9mm. Perfect fit, not sloppy at all, impressed. Even my XD .45 double stack 10rd mags with finger extension fit no prob! Sum it all up- This is not a pelican case - but - it is good quality and well worth the low price tag for what you get, and i am glad i took a gamble on it. I also own pelican cases. If i ever go to the top of Everest or a hardcore whitewater rafting adventure, i will take the pelican case - otherwise this Case Club case seems more than adequate for just about anything i intend to throw at it on a normal use basis. It is not flimsy at all, and its air tight.